5.8GHz Microwave Sensor motion sensor Switch 110V AC

5.8GHz Microwave Sensor Switch Motion Sensor

Product detail:
This switch with a military communications microwave (radar) technology and
microprocessor design is made with a sample-accurate, stable and long working
hours, to adapt to a wide range of temperature and induction covering a large
area. Radar scan signal issued by the sensors can penetrate wooden doors, glass,
and a thin wall (installation can be concealed for anti-theft searchlight), and
can achieve accurate delay lights people, people from the lights out. Widely
used in recessed light fixtures and staircases, corridors, channel, patio,
warehouse, bathroom, toilet, basement, parking should not only lighting but also
saving places.

Note:
1) before any disassembly operation of the sensor lights, turn off the power
supply operation by a professional electrician.
2) by the supply voltage of the installation and use of sensors must strictly
follow the appropriate regulations andelectricity requirements of national
security lines.
3) the switch can not be all-metal shielding window of the sensor; You must
ensure that the window of the sensorwithout metal body.
4) In case of some special circumstances or to use in a particular environment,
so that the sensor set sensing distance slightly lower to runaway.

Parameter:
Size: 92x40mm
Model: TCZ3800
Material: PC fire-retardant material
Voltage: 100V ~ 127V AC

Install: indoor
High-frequency system: 5.8GH CW radar , ISM band
Transmit power: <10mW
Detection angle: 360°

Photosensitive set：2~2000 Lux
Time setting: 10S~3Min
Sensing distance set: 2-8m

Packing List:

1x Microwave Radar Sensor Switch 110V AC