Roche M170 3x CREE XM-L2 U2 & LD-35 Driver Based Flashlight

Roche M170

3x CREE XM-L2 U2 & LD-35 Driver
Based Flashlight

2500LM

• Aircraft Grade Aluminum
• 3x CREE XM-L2 U2 LED
• Brightness: 2500 lumens
• Power By: 4*18650 (Parallel configuration)
• Smooth Aluminum reflector
• Excellent regulation, high efficiency driver LD-35
• Constant current, constant brightness output
• Modes: Ramping (100%-5%) – Medium 40% – Strobe
• Low voltage warning
• Removable carrying handle
• Tripod mount (if the handle is removed)
• Side electronic switch
• Stainless steel flat bezel
• Brass ring protects the driver from battery friction
• IPX8 Waterproof
• Hard Anodize 3 Finishing
• Dimensions (mm): 147(length) x 50(body) x 68(head)
• Weight: 545g (Without batteries)
• Accessories: Spare O-rings, Lanyard, Adapter for flat-top cells,

Current & Voltage:

• When the input voltage is over 4V the output current is 2.5A, when it’s
  over 3.8V the output current is 2.2A, and when it’s over 3.6V the output
  current is 2A

Utilization interface:

• Press the switch for 3seconds to turn the flashlight with max
  brightness, 100%
• Press the switch continuously and the flashlight will enter the ramping
  mode, release the switch at the desired brightness, it will be memorized.
• Simply click and release the switch to access the Medium (40%) mode if
  you are in the first mode (the custom ramping mode).
• When on Medium (40%) double tap the switch and the flashlight will enter
  the strobe mode

Manufacturer indications:

• Do not disassemble the flashlight head, warranty will be void and you
  may damage the flashlight
• Low voltage warning: Flashes 3 times every 5 minutes
• Use high quality batteries and remove them from the flashlight if you do
  not use the flashlight for a long time
• Regularly clean conductive surfaces with alcohol to make sure the
  flashlight works properly at any time

Package 1x M170 Flashlight, 1x Spare O-rings, 1x
Lanyard, 1x Adapter for flat-top cells