Powerful Flood Lights With In-built Intelligent Fog Detection System


BINAY I-FOGSENSE is an antifog flood light that automatically detects fog and intelligently controls the temperature and intensity of light to improve visibility.

BINAY released I-FOGSENSE, which is an intelligent antifog floodlight. I-FOGSENSE antifog PowerLed flood light fixtures automatically detect and adjust the color temperature and light intensity based on the fog. These PowerLED lights use reliable high efficiency LEDs that offer a system efficiency of up to 165 to 180 lm / Watt. The intelligent fog light can provide an energy efficiency of more than 70% of conventional lighting when LEDs are combined with energy saving controls. I FOGSENSE uses PLCDC Nanogrid Technology which greatly reduces the risk of fire as it operates on 48V PLCDC with a lower spark potential.

Fog can create safety issues in a variety of applications such as mines, airports, ports and more. Both methods have inherent disadvantages that include higher wattage consumption on a permanent basis that wastes energy, while warm CCT reduces visibility under normal (clear or non-fog) conditions. condition. INTELLIGENT ANTIFOG PowerLED Flood Light fixtures are designed to intelligently adjust their intensity (or color temperature) depending on the presence of fog. It automatically detects fog and dynamically adjusts brightness or CCT or both in real time to improve visibility in foggy conditions.

According to the company, the BINAY I-FOGSENSE INTELLIGENT ANTIFOG PowerLED Flood Light includes an intelligent fog detection unit to dynamically increase the light intensity up to 2 times or change the color temperature (or both), if the presence of fog can be detected with its accompanying IntelliFog Detector. These PowerLED lights use the most reliable high efficiency LEDs and offer energy savings of up to 40% over standard LEDs and over 70% over conventional lighting when LEDs are combined with controls to save energy.


Source link


1 Comment

  1. […] the DUT is assembled, it should go for a functional test defined by the design team. Here, the test system must provide power to the DUT, provide all electrical interfaces (DC, digital, RF), and run the test plan that […]

Leave a Comment

Your email address will not be published.